Solid Sodium Hypochlorite

Step 1

Prepare the solution: According to the required disinfection concentration and dosage, dissolve the appropriate amount of sodium hypochlorite in water to make the required disinfection solution. You can refer to the product manual or consult a professional to ensure the right concentration of the solution according to the specific situation.

Step 2

Clean the surface: Before disinfecting, clean the surface to be disinfected. Remove dirt, residue and organic matter to ensure that the surface is dry and clean to improve the disinfection effect.

Step 3

Spraying or soaking: Spray or soak the sodium hypochlorite disinfectant solution evenly onto the surface or item to be disinfected using a sprayer, sprinkler or soaking method. Make sure to cover the area to be disinfected so that the disinfectant solution makes full contact and covers all surfaces.

Step 4

Contact time: Depending on the need and actual situation, the disinfectant solution needs to remain on the surface for a certain contact time, usually 10 to 30 minutes. This ensures that the disinfectant exerts its germicidal effect and completely inactivates pathogenic microorganisms.

Step 5

Cleaning and rinsing: At the end of disinfection, the treated surface or item should be thoroughly cleaned and rinsed to rinse off any residual disinfectant.

Step 6

Follow safe practices: When using sodium hypochlorite disinfectant solution, wear appropriate personal protective equipment (PPE) such as gloves and glasses to prevent skin and eye irritation or injury from direct contact with the solution.