Boiler Corrosion Inhibitor

Boiler corrosion inhibitors are a class of additives used to prevent rust and corrosion inside boilers. They can significantly reduce the concentration of metal ions in water, prevent metal corrosion, maintain the normal operation of the boiler and extend the service life of the boiler. In actual production work, the use of boiler corrosion inhibitors is a necessary measure to ensure the long-term operation of the boiler.

1. In general, the additive cycle of boiler corrosion inhibitor is one to two months.

2. With the increase of impurities in the water and changes in the amount of corrosion inhibitor consumption, the use cycle will change, and need to be adjusted for the actual situation.

3. If the boiler water conditions are good, the use of suitable corrosion inhibitors, you can extend the use of appropriate cycles; and if the water quality is poor or the use of corrosion inhibitors do not meet the expected results, you need to shorten the use of cycles or re-select the corrosion inhibitor.

Need to use the boiler corrosion inhibitor as much as possible to ensure that the water quality is clean, to prevent interference due to impurities and affect the effect of the corrosion inhibitor.

After the use of corrosion inhibitors, the need for regular measurement of water quality, in order to detect problems and make timely adjustments.

When dosing in the boiler, safety regulations should be strictly adhered to, do not carry out overdose, leakage, repeated addition and other human errors.

In the process of using the corrosion inhibitor, it should be tested regularly to determine whether its additive quantity meets the requirements of the water quality in the boiler.